Pure tetrahedral quadruple systems with index two

An oriented tetrahedron defined on four vertices is a set of four cyclic triples with the property that any ordered pair of vertices is contained in exactly one of the cyclic triples. A tetrahedral quadruple system of order $n$ with index $\lambda$, denoted by ${\text{TQS}}_{\lambda }\left(n\right)$, is a pair $\left(X,\mathrm{?}\right)$, where $X$ is an $n$‐set and $\mathrm{?}$ is a set of oriented tetrahedra (blocks) such that every cyclic triple on $X$ is contained in exactly $\lambda$ members of $\mathrm{?}$. A ${\text{TQS}}_{\lambda }\left(n\right)$ is pure if there do not exist two blocks with the same vertex set. When $\lambda =1$, the spectrum of a pure TQS $\left(n\right)$ has been completely determined by Ji. In this paper, we show that there exists a pure ${\text{TQS}}_2\left(n\right)$ if and only if $n\equiv 1,2\left(\mathrm{mod}3\right)$ and $n\ge 7$. A corollary is that a simple ${\text{QS}}_4\left(n\right)$ also exists if and only if $n\equiv 1,2\left(\mathrm{mod}3\right)$ and $n\ge 7$.     

砂岩方梁断裂过程区范围的实验确定方法

裂纹前端的断裂过程区是引起岩石非线性断裂及尺寸效应的主要原因。利用数字图像相关技术对砂岩开展了三点弯曲梁实验,获得观测区域高精度的全场位移和应变数据,根据断裂韧带区域水平位移和水平应变的分布特征,结合裂尖岩石颗粒变化的微观分析,提出采用裂纹尖端水平位移波动性和水平应变突变性所得到的波动系数和水平应变突变值,确定断裂过程区形状和临界尺寸的方法。结果表明:砂岩断裂过程区的形状为不规则的狭长带状区域,断裂过程区的临界长度为11~13mm,临界宽度为1.58~2.36mm。断裂过程区区域内形变在趋向裂尖时呈指数增加,但其单位区域内的形变增量呈波动状态。该方法能够更加准确判断岩石断裂过程区的范围,有助于分析岩石的非线性断裂特性。     

作业成本法数学模型的创新

随着企业产品价格竞争愈演愈烈，成本的合理分配、计算日显重要，但在间接费用的分摊上，传统成本会计对成本信息反映失真的局限性日益显露，会计理论界和实务界开始寻求一种新的准确的成本计算方法，作业成本法应运而生。本将由作业成本法基本原理推导出其数学模型，并将对其数学模型进一步改进，建立比较数学模型。使作业成本法向实际应用更进一步。     

A numerical and experimental investigation of the interactions between a non‐uniform planar array of incompressible free jets

The interaction between multiple incompressible air jets has been studied numerically and experimentally. The numerical predictions have been first validated using experimental data for a single jet configuration. The spreading features of five unequal jets in the configuration of one larger central jet surrounded by four smaller equi‐distant jets, have been studied, for different lateral spacing ratios of 1.5, 2.0 and 2.5 and a central jet Reynolds number of 1.24×105 (corresponding to a Mach number of 0.16). Flow of five equal jets has also been simulated, for the sake of comparison. The jet interactions commence at an axial distance of about 3–4 diameters and complete by an axial distance of about 10 diameters for the lowest spacing ratio of 1.5. For larger spacing ratios, the length required for the start and completion of jet interaction increase. Peripheral jets bend more towards the central jet and merge at a smaller distance, when their sizes are smaller than that of the central jet. The entrainment ratio for multiple jets is higher than that for a single jet. Excellent agreement is observed between the experimental data and theoretical predictions for both mean flow field and turbulent quantities, at regions away from the jet inlet. The potential core length and initial jet development, however, are not predicted very accurately due to differences in the assumed and actual velocity profiles at the jet inlet. Copyright © 2004 John Wiley & Sons, Ltd.     

物质纯重力场部分的能量-动量张量研究

认为物质的质量(能量)存在形式可分为两部分，一部分是以纯物质形式存在的，另一部分是以纯重力场形式存在的.物质质量(能量)这两种形式各自对应着相应的能量 动量张量，物质总的能量-动量张量可表示为Tμν=T(Ⅰ)μν+T(Ⅱ)μν,这里，T(Ⅰ)μν，T（Ⅱ）μν分别代表物质纯物质部分和纯重力场部分的能量-动量张量.通过类比电磁理论，定义：ωμ≡-c2gμ0/g00,并引入一个反对称张量Dμν=ωμ/xν-ων/xμ，则物质纯重力场部分的能量-动量张量为T(Ⅱ)μν=(DμρDρν-gμνDαβDαβ/4 关键词： 能量-动量张量 纯重力场 重力场方程 标量重力势 矢量重力势     

Simple Entanglement Measure for Multipartite Pure States

A simple entanglement measure for multipartite pure states is formulated based on the partial entropy of a series of reduced density matrices. Use of the proposed new measure to distinguish disentangled, partially entangled, and maximally entangled multipartite pure states is illustrated.     

Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

Difference Families in Z2d+1⊕Z2d+1 and Infinite Translation Designs in Z⊕Z

We analyse 3-subset difference families of Z_2d+1⊕Z_2d+1 arising as reductions (mod 2d+1) of particular families of 3-subsets of Z⊕Z. The latter structures, namely perfect d-families, can be viewed as 2-dimensional analogues of difference triangle sets having the least scope. Indeed, every perfect d-family is a set of base blocks which, under the natural action of the translation group Z⊕Z, cover all edges {(x,y),(x′,y′)} such that |x−x′|, |y−y′|≤d. In particular, such a family realises a translation invariant (G,K₃)-design, where V(G)=Z⊕Z and the edges satisfy the above constraint. For that reason, we regard perfect families as part of the hereby defined translation designs, which comprise and slightly generalise many structures already existing in the literature. The geometric context allows some suggestive additional definitions. The main result of the paper is the construction of two infinite classes of d-families. Furthermore, we provide two sporadic examples and show that a d-family may exist only if d≡0,3,8,11 (mod 12).     

利用富铈混合稀土改善工业纯铝中富铁相形貌的研究

利用金相分析方法研究了富Ce混合稀土变质对含不同Fe量的工业纯铝的组织和其中富铁相形貌的影响。试验结果表明,随着Fe含量的增加,富铁相由弥散细小的颗粒状向短棒状、长针状转变;富Ce混合稀土变质使铝中的富铁相由长针状变为弥散细小的颗粒状。随着稀土含量的增加,-αAl晶粒逐渐细化,富铁相尺寸及数量逐渐减小。添加0.5%稀土时,-αAl晶粒细化效果最佳,而且富铁相呈细小颗粒状均匀分布在-αAl基体的晶界处。本文还对稀土改善富铁相的机制进行了分析。